Home page




 

Path: Technical University of Crete > Departments > Mineral Resources Engineering> Department > Divisions > Research Units > Quality Control - Health and Safety in the Mineral Industry > Research activity

Quality Control - Health and Safety in the Mineral Industry

Division of Mining Technology

Go to the home page of this research unit

Research activities

Quality Control for the Mineral Industry

  1. M. Galetakis, K. Leventakis and G. Alevizos, 2011, ‘Evaluation of fine limestone quarry by-products, for the production of building elements- an experimental approach’, Construction & Building Materials (submitted).
  2. M. Galetakis, C. Roumpos, 2010, ‘The effect of quality and reserves uncertainty to production scheduling of a lignite mine feeding a power plant’, Sixth International Conference on Sensitivity Analysis of Model Output, Procedia Social and Behavioral Sciences 2, 7654–7655 (Extended summary).
  3. D. Vanvuka and M. Galetakis, ‘Carbon Dioxide Emissions from Coal-fired Power Plants in Greece in Relation to Mined Lignite Quality’, Energy and Fuels, 24, 1396–1401, 2010.
  4. M. Galetakis & F. Pavloudakis, ‘The effect of lignite quality variation to the efficiency of the on-line ash analyzers’, Int. Journal of Coal Geology, 80, 145-156.
  5. M. Galetakis, G. Alevizos, F. Pavloudakis, C. Roumpos and C. Kavouridis, ‘Prediction of the performance of on-line ash analysers used in the quality control process of a coal mining system’, Energy Sources:Part A, 31, 1127–1142, 2009.
  6. Galetakis, D. Vamvuka, C. Roumpos and F. Pavloudakis, ‘Prediction of annual CO2 emissions of lignite mined from the South Field Mine, Greece’, Proced. of the 3rd AMIREG International Conference (2009): Assessing the Footprint of Resource Utilization and Hazardous Waste Management, Athens, Greece, 177-182.
  7. M. Galetakis, K. Leventakis and G. Alevizos, ‘Characterization of quarry fines for recycling uses in construction’, Proced. of the 3rd AMIREG International Conference (2009): Assessing the Footprint of Resource Utilization and Hazardous Waste Management, Athens, Greece, 125-130.
  8. K. Leventakis and M. Galetakis, ‘Utilization of fine quarry by-products for the production of building elements by extrusion - an experimental approach’, Proced. of the 3rd AMIREG International Conference (2009): Assessing the Footprint of Resource Utilization and Hazardous Waste Management, Athens, Greece, 258-264.
  9. K. Kavouridis, C. Roumpos and M. Galetakis, 2007, ‘The effect of power plant efficiency, lignite quality and inorganic matter on CO2 emissions and competitiveness of Greek lignite’, Mining and Geoengineering, 31(2), 355-369.
  10. Á. Pavlidis, D.T. Hristopulos and M. Galetakis, ‘Prediction of long-term quality fluctuations in the South Field lignite mine of West Macedonia’, Proced. of the 2nd International Symposium on Advances in Mineral Resources Management and Environmental Geotechnology, Hania 2006, Greece, 163 - 168.
  11. M. Galetakis, C. Kavouridis, A. Kouvata, C. Roumpos, F. Pavloudakis, O. Kouridou and K. Stamoulis, ‘The Effect of Tectonics to Quality Variation of Lignite Mined from Southern Field Mine of Ptolemaes – Greece’, Proced. of the International Symposium on Mine Planning and Equipment Selection (eds Cardu, Ciccu, Lovera & Michelotti), Torino 2006, Italy, 1106-1111.
  12. M. Galetakis, F. Pavloudakis, C. Roumpos (2005), ‘The contribution of the on-line coal analysers to the sustainability of Greek lignite mining sector’, Proced.of 2nd Int. Conference on Sustainable Development Indicators in the Minerals Industry (SDIMI 2005), May 18th - 20th, 2005, Aachen, Germany, 819-828.
  13. G. Alevizos, M. Galetakis, ‘Mineralogical study of anhydrite-gypsum occurrence in the area of Vathi at western Crete – quality variation and mining particularities’, Mining and Metallurgical Annals, 15(1), 83-102, 2005. (in Greek with English summary)
  14. K. Papanicolaou, M. Galetakis, A. Foscolos, 2005. ‘Quality characteristics of greek brown coals and their relation to the applied exploitation and utilization methods’, Energy and Fuels, 19(1), 230-239.
  15. M. Galetakis, K. Papanicolaou, ‘Estimation of the effect of partings to the quality of recoverable lignite mined from multiple-layered deposits’ Bulletin of the Geological Society of Greece, vol. XXXVI, 274-282, 2004. (in Greek with English abstract)
  16. M. Galetakis and S. Raka, 2004, ‘Assessment of limestone quarry dust by using factorial design of experiments’, Proceedings of the International Symposium on Advances in Mineral Resources Management and Environmental Geotechnology, Hania 2004, Greece, pp. 685-689.
  17. M. Galetakis and G. Alevizos, 2004, ‘The effect of the inorganic matter of lignite to the accuracy of the on-line quality analyzer’, Proceedings of the International Symposium on Advances in Mineral Resources Management and Environmental Geotechnology, Hania, Greece, pp. 663-668.
  18. D. Vamvuka, M. Galetakis F. Pavloudakis and K. Kavouridis, 2004, ‘Methods of upgrading and controlling the quality of lignite mined from West Macedonia Lignite Centre’, Proceedings of the International Symposium on Advances in Mineral Resources Management and Environmental Geotechnology, Hania, Greece, pp. 647-654.
  19. M. Galetakis and D.T. Hristopulos, 2004, ‘Prediction of long-term quality fluctuations in the South Field lignite mine of West Macedonia’, Proceedings of the International Symposium on Advances in Mineral Resources Management and Environmental Geotechnology, Hania, Greece, pp. 133-138.
  20. M. Galetakis, S Raka, 2004, ‘Utilization of limestone dust for artificial stone production. An experimental approach’, Int. Journal of Minerals Engineering, 2, 355-357.
  21. F. Pavloudakis, M. Galetakis, Z. Agioutantis and K. Kavouridis, ‘Evaluation of on-line quality analyzer results, during its trial operation at Western Macedonian Lignite Mines’, Technical Chronicles, Scientific Journal of the Technical Chamber of Greece, vol. 1&2, 27-38, 2003. (in Greek with English extended summary)
  22. M. Galetakis, G. Alevizos, 2003, ‘On–line monitoring of lignite quality in relation to ash mineral matter’, Berichte der Deutschen Mineralogischen Gesellschaft, No.1, pp. 60.
  23. M. Galetakis, G. Alevizos, 2002, ‘Preliminary quality assessment of West Crete gypsum-anhydrite deposit, based on mineralogical analysis’, Berichte der Deutschen Mineralogischen Gesellschaft, No.1, pp. 48.
  24. Th. Markopoulos, M. Galetakis, 2001, ‘Investigation of stones used for restoration/reconstruction of the Church of Saint Peter Dominican, Heraklion-Crete’, Acta Universitatis Carolinae, Geologica, 45(1), 151-157.
  25. M. Galetakis, ‘Quality Control for multivariate correlated observations. The case of the South Field lignite mine at Ptolemaes area’, Mineral Wealth, 119, 35-44, 2001.
  26. Th. Markopoulos, M. Galetakis, 2000, ‘Mortars used for restoration of Saint Peter Dominican Church, Heraklion-Crete’, Proceedings of the International Congress Quarry – Laboratory – Monument, , Pavia, 26-30 Sept., pp. 425-430.
  27. E. Mystakidou, M. Galetakis, 2000, ‘Preliminary investigation of waste layers mined from Ptolemaes area lignite mines, as raw material for the ceramic industry’, DTTG-2000, Jahrestagung der Deutschen Ton und Tonmineralgruppe, Zurich, 30 August – 1 September, pp. 34.
  28. M. Galetakis, Z. Agioutantis, 2000, ‘The influence of strategic development options on the long term quality variation of (mined) lignite - the case of the South Field Mine in Ptolemais – Greece’, Proceedings of the Ninth International Symposium on Mine Planning & Equipment Selection, (MPES), Athens 6-9 November, pp. 57-62.
  29. E. Mistakidou, M. Galetakis, ‘Quality characteristics and possible uses of Western Rhodopi pegmatetic feldspars’ Proceedings of the 3rd Conference of the Technical Chamber of Greece for the Mineral Wealth, 22-24 November, Athens, vol. A, 69-76, 2000.
  30. K. Kavouridis, M. Galetakis, ‘Determination of the dilution of the exploitable lignite mined from multiple-layered deposits’, Proceedings of the 1st Conference of the Society of Economic Geology of Greece: Mineral Wealth and Environment in Western Macedonia, 12-13 February, Kozani, 158-176, 2000.
  31. M. Galetakis, K. Kavouridis, ‘Homogenization of Quality of Lignite Mined from the Ptolemaes – Amynteon Lignite Basin’, Technical Chronicles, Scientific Journal of the Technical Chamber of Greece, vol. 1&2, 41-52, 1999. (in Greek with English extended summary)
  32. C. Kavouridis, M. Galetakis, ‘Determination of the lignite quality produced in Ptolemaes open cast mines for power generation’, Fuel and Energy Abstracts, 37(5), 330, 1996.
  33. C. Kavouridis, M. Galetakis, ‘Determination of lignite quality produced in Ptolemaes open cast mines for power generation’, Mineral Wealth, 98, 25-42, 1996. (in Greek with English extended summary)
  34. M. Galetakis ‘Determination of lignite quality mined from multiple-layered deposits by applying continuous opencast methods", PhD Thesis, Technical University of Crete, 262 p., 1996. (in Greek)
  35. Th. Markopoulos, M. Galetakis 1995, ‘Quarrying activities in Crete and aggregates quality’, Workshop of Technical Chamber of Greece on Extraction and handling of aggregates in Greece, 5 May, Athens 1995.
  36. G. Kostakis, E. Mystakidou, M. Galetakis, G. Alevizos, ‘Mineral matter of lignite used in P.P.C. Briquetting Plant at Ptolemaes (Greece)’, Berichte der Deutschen Mineralogischen Gesellschaft, No.1, pp. 151, 1994.
  37. M. Galetakis, ‘Laboratory test for aggregates’, Seminar of the Geotechnical Chamber of Greece-Western Crete Division on Engineering Geology, 1992.

Health and Safety in Mining and Quarrying

  1. M. Galetakis, G. Alevizos and I. Aspirtakis, ‘Crystalline silica dust determination in limestone aggregate quarries in Greece’, Proced. of the 3rd AMIREG International Conference (2009): Assessing the Footprint of Resource Utilization and Hazardous Waste Management, Athens, Greece, 113-118.
  2. I. Aspirtakis, M. Galetakis, ‘Occupational risk assessment and best practices in aggregate quarries’, Proceedings of the 1st Greek Conference in Construction and Building materials, 21-23 May 2008, Athens, vol. B, 829-841, 2008.
  3. Aspirtakis, M.Galetakis, ‘Occupational risk assessment in quarry industries and best paractices’, Quarry magazine, vol. 8, 44-50, 2008. (in Greek)
  4. Aspirtakis, K. Vrodakis, M.Galetakis, ‘Not all the quarry dusts are the same: the crystalline silica’, Quarry magazine, vol.10, 58-63, 2008. (in Greek)

Application of Stochastic Methods, Simulation and AI Techniques (Fuzzy, Neural Networks)

  1. M. Galetakis, C. Roumpos, G. Alevizos and D. Vamvuka, 2011 ‘Production scheduling of a lignite mine under quality and reserves uncertainty’, Reliability Engineering & System Safety (submitted).
  2. M., Galetakis and A., Vasiliou, 2011, ‘Applications of Fuzzy Inference Systems in Mineral Industry- Overview’, In: Expert System Software: Engineering, Advantages and Applications, Editors: Jason M. Segura and Albert C. Reiter (in press).
  3. M. Galetakis and A. Vasiliou, ‘Selective mining of multiple-layer lignite deposits. A fuzzy approach’, Expert Systems with Applications, 37, 4266–4275, 2010.
  4. M. Galetakis and D. Vanvuka, ‘Lignite quality uncertainty estimation for the assessment of CO2 emissions’, Energy & Fuels 2009, 23, 2103–2110.
  5. M. Galetakis, A. Vasiliou, C. Roumpos and F. Pavloudakis, ‘Calibration of on-line ash analyzers using Adaptive Neuro-Fuzzy Inference Systems (ANFIS)’, Proced. of the 2nd International Symposium on Advances in Mineral Resources Management and Environmental Geotechnology, Hania 2006, Greece, 177-182.
  6. M. Galetakis, A. Vasiliou, C. Roumpos, F. Pavloudakis (2005), ‘Developing Fuzzy Inference Systems (FIS) for the evaluation of multiple-layer lignite deposits’, Int. Workshop, Geoenviroment and Geotechnics (GEOENV 2005), Sept. 12th - 14th, 2005, Milos, Greece, 99-104.
  7. M. Galetakis, G. Alevizos, 2004. ‘Forecasting electric coal quality by using artificial neural networks’, Berichte der Deutschen Mineralogischen Gesellschaft, Íï1, pp 42.
  8. M. Galetakis, K. Theodoridis, O. Kouridou, 2002, ‘Lignite Quality Estimation Using Artificial Neural Networks (ANN) and Adaptive Neuro-Fuzzy Inference Systems (ANFIS)’, Proceedings of the Int. Symposium Computer Application in the Mineral Industries (APCOM), Phoenix, Arizona, USA, February 25-27, pp. 425-432.
  9. M. Galetakis, Th. Markpoulos, G. Christidis, E. Repouskou, G Alevizos, ‘Prediction of aggregates quality characteristics by using Artificial Neural Networks’ Proceedings of the 3rd Conference of the Technical Chamber of Greece for the Mineral Wealth, 22-24 November, Athens, vol. A, 571-577, 2000.
  10. M. Galetakis, 1999, ‘Improving lignite quality estimation using artificial neural networks techniques’, New Technologies for Coal Quality Control and Homogenization, International Workshop, Thermie Program, Europ. Com. DG XVII Energy, Athens.
  11. M. Galetakis, "Application of artificial neural networks in solving problems related with open pit mine planning and design", Mineral Wealth Vol. 113, pp. 47-56, 1999. (in Greek with English extended summary)
  12. M. Galetakis C. Kavouridis, 1998, "Quality Control of Lignite Produced by Continuous Surface Mining, using Statistical Methods", Technical Chronicles, Scientific Journal of the Technical Chamber of Greece, vol. 1&2, 49-61, 1988. (in Greek with English extended summary)
  13. M. Galetakis, 1998, ‘Evaluation of multiple seam lignite deposits of Ptolemaes area, using statistical methods’, Mineral Wealth, 107, 55-64.
  14. Ì. Galetakis , 1997, ‘Determination of dilution of lignite during selective mining with bucket wheel excavators, using neural networks techniques’, MineIT’ 97, 1st International Conference on Information Technologies in the Mineral Industry via Internet, Ed. G. Panagiotou, AA Balkema , Rotterdam.
  15. M. Galetakis C. Kavouridis, 1996 ‘A statistical approach to the quality of Ptolemaes multi-seam lignite deposits and its effect on selective mining’, XV Congress of the Carpatho-Balkan Geological Association, Sept. 17-19 Athens, Abstracts pp. 19-20.
  16. M. Galetakis, ‘Application of expert systems in Geosciences’, Workshop of the Geotechnical Chamber of Greece-Western Crete Division on Application of Information Technologies in Geology , 13-14 May, 1992.
  17. M. Galetakis, A. Kapenis, ‘Computer-aided drillhole data evaluation’ Diploma Thesis, Technical University of Athens, 86 p., 1983. (in Greek)

Mine Planning and Design/Reclamation

  1. M. Galetakis, C. Roumpos, F. Pavloudakis, ‘Determination of the optimal exploitable lignite blocks to be mined by bucketwheel excavators’, honorary edition for Prof. Kavouridis, Chania, 43-56, 2010. (in Greek with English abstract)
  2. F. Pavloudakis, C. Roumpos, C. Sahanidis and M. Galetakis, ‘Development of a new framework for the environmental management of the lignite mines in the Ptolemais basin’, honorary edition for Prof. Kavouridis, Chania, 171-180, 2010. (in Greek with English abstract)
  3. F. Pavloudakis, M. Galetakis & C. Roumpos, 2009, ‘A spatial decision support system for the optimal environmental reclamation of open-pit coal mines in Greece’, Int. Journal of Mining, Reclamation and Environment, 23(4), 291 – 303.
  4. C. Roumpos, F. Pavloudakis and M. Galetakis, ‘Optimal production rate model for a surface lignite mine’, Proced. of the 3rd AMIREG International Conference (2009): Assessing the Footprint of Resource Utilization and Hazardous Waste Management, Athens, Greece, 360-365.
  5. K. Kavouridis, C. Roumpos, M. Galetakis & F. Pavloudakis, ‘Methods and Technological Improvements for the Efficient Removal of the Overburden Hard Rock Formations at South Field Lignite Mine, Ptolemais, Greece’, Proced.of 9th International Symposium ‘Continuous Surface Mining’, 8-11 October 2008, Petrosani – Romania, 91-100.
  6. K. Kavouridis, M. Galetakis, F. Pavloudakis and A. Filiou, ‘Energy and environmental policy: Two sides of the same coin. The approach of coal extraction industry for the development of emissions trading after 2012’, Proced. of the Int. Workshop, Geoenviroment and Geotechnics (GEOENV), Sept. 12th – 14th, 2008, Milos, Greece, 221-230.
  7. C. Roumpos, F. Pavloudakis and M. Galetakis, ‘Benchmarking and sustainability indicators for surface mining operations’, Proced. of 3rd Int. Conference on Sustainable Development Indicators in the Minerals Industry (SDIMI), June 17th – 20th, 2007, Milos, Greece, 295-300.
  8. F. Pavloudakis, C. Roumpos, C. Sachanidis and M. Galetakis, ‘Environmental impacts assessment of surface mining operations: a review of the Greek experience’, Proced. of the International Symposium on Mine Planning and Equipment Selection (eds Cardu, Ciccu, Lovera & Michelotti), Torino 2006, Italy, 1106-1111.
  9. F. Pavloudakis, C. Roumpos and M. Galetakis, ‘Critical environmental and social parameters affecting the development of new surface mines’, Proced. of the 2nd International Symposium on Advances in Mineral Resources Management and Environmental Geotechnology, Hania 2006, Greece, 177-182.
  10. C. Roumpos, F. Pavloudakis, M. Galetakis (2005), ‘Modelling and evaluation of open-pit lignite mines exploitation strategy’, Proced.of 2nd Int. Conference on Sustainable Development Indicators in the Minerals Industry (SDIMI 2005), May 18th - 20th, 2005, Aachen, Germany, 141-150.
  11. F. Pavloudakis, C. Roumpos, M. Galetakis, (2005), ‘Comparing investment options in a lignite deposit exploitation project’, Proced. of Int. Workshop, Geoenviroment and Geotechnics (GEOENV 2005), Sept. 12th - 14th, 2005, Milos, Greece, 229-234.

Home page
| Terms of use | Contact us
©2006-2010 Department of Mineral Resources Engineering, Technical University of Crete