Journal articles

# references = 1399       h-factor = 19

(27/10/15)

 

  1. (1)Synthesis and linear viscoelasticity of polystyrene stars with a polyketone core

MACROMOLECULES, 48(18), 6662-6671, 2015

  1. (2)Gas transport properties in water-borne polymer nanocomposite coatings containing organomodified clays

J.Coating Tech. res. 11(6) 899-911, 2014

  1. (3)Gas barrier properties in polymer nanocomposite coatings containing Li-hectorite clay

J.appl.polym.sci. 131(18), 9558-9569, 2014

  1. (4)Morphology and gas transport properties of acrylic resin/bentonite nanocomposite coatings

Progress in Organic Coatings, 77, 845-852 (2014)

  1. (5)Free volume and transport properties in polymer nanocomposites

Curr.Op.Col.Interf.Sci., 17(3), 132-140, 2012

  1. (6)Διακλαδωμένο πολυπροπυλένιο: Καλή αντοχή τήγματος και επεξεργασιμότητα σε διεργασίες που περιλαμβάνουν ροές εφελκυσμού

Bull.Hell.Soc.Chem.Eng., 202, 18-22, 2001

  1. (7)The free volume in acrylic resin/laponite nanocomposite coatings

European Polymer journal, , 47(3), 264-272 (2011)

  1. (8)Permeability of polymer/clay nanocomposites

MRS Proc. 1312, pp. 397-407, 2011

  1. (9)Fracture properties of ternary Polyethylene/polyamide-6/glass-fiber composites

Composites science & technology, 70(5), 734-742, 2010


  1. (10)Permeability of polymer/clay nanocomposites. A Review

European polymer journal 48, 967-984, 2009

  1. (11)Long Chain Branching on Linear Polypropylene by Solid State Reaction

european Polymer journal, 44, 200-212, 2008

  1. (12)The effect of annealing on the melt rheology of ternary PE/PA6/GF composites

polymer 48, 6834-6842, 2007

  1. (13)Evolution of the morphology and the mechanical properties of ternary PE/PA6/GF composites during annealing

polymer 48, 6294-6303, 2007

  1. (14)The strain dependence of the dynamic moduli of short fibre reinforced thermoplastic blends

polymer 31, 235-260, 2007

  1. (15)An integral constitutive equation for the analytic description of nonlinear viscoelastic stress in fluids under elongation

J. non-newt. flow mech. 138, 33-43, 2006

  1. (16)The relation between rheological and mechanical properties of PA6 nano- and micro-composites

polymer 46, 10279-10289, 2005

  1. (17)Distribution of oil in olefinic thermoplastic elastomer blends

polymer 46, 6391-6401, 2005

  1. (18)Dielectric spectroscopy using dielectric probes: A new approach to study glass transition dynamics in immiscible apolar polymer blends

polymer 46(16) 6064-6074, 2005

  1. (19)Mechanical properties of fiber reinforced polymer blends

Polymer 46, 3895-3905, 2005

  1. (20)Linear viscoelastic properties of olefinic thermoplastic elastomer blends: melt state properties

polymer, 45926), 8881-8891, 2004

  1. (21)Dynamic Rheological and Mechanical properties of olefinic thermoplastic elastomer compounds

spe antec tech. papers, 50, 3265-3269, 2004

  1. (22)Effect of long branches on the rheology of polypropylene

j. rheology, 48(4), 895-914, 2004

  1. (23)The effect of long chain branching on the processability of polypropylene in thermoforming

polym.Eng.Sci. 44(5), 973-982, 2004

  1. (24)A comparative study of morphology and structure related properties of saturated olefinic thermoplastic elastomer blends of EPDM/PP/Oil and SEBS/PP/Oil

elastomer 38, 27-37, 2003

  1. (25)Vertakt polypropeen: hoge smeltsterkte en goede verwerkings-eigenschappen in rekstroming

kunststof en rubber, 56, 28-30, 2003

  1. (26)Rheological Characterisation of Long Chain Branching in a Melt of Evolving Molecular Architecture

macromolecules, 36, 4685-4687, 2001

  1. (27)The influence of peroxydicarbonate modification on the extensional properties of polypropylene

polymer 42[25], 10025-10-43, 2001

  1. (28)The extensional viscosity of a thermotropic liquid crystalline polymer

j. Rheology, 44(5), 1205-1223, 2000

  1. (29)Rheological studies of water-in-oil-in-water double emulsions

progr.coll.polym.sci 115, 315-319, 2000

  1. (30)Morphology development in immiscible polymer blends: initial blend morphology and phase dimensions

proc. 15th pps conference, 249:1-10, 1999

  1. (31)Comparison of three methods to measure the elongational viscosity of polymer melts: Entry flows, fibre spinning and uniaxial elongation

SPE antec tech. papers, 45, 1156-1161, 1999

  1. (32)Co-continuous morphologies in polymer melts: the influence of the interfacial tension

polymer, 40, 827-834, 1999

  1. (33)The relevance of entry flow measurements for the estimation of extensional viscosity of polymer melts

Rheologica Acta, 37, 430-437, 1998

  1. (34)Co-continuous morphologies in polymer melts: a new model

Polymer, 39, 5879-5887, 1998

  1. (35)Stability of blends with co-continuous morphologies during injection molding

SPE antec tech. papers, 44, 2556-2560, 1998

  1. (36)Elongational viscosity of a thermotropic liquid crystalline polymer

Progress and Trends in Rheology 5, 222-224, 1998

  1. (37)Influence of the flow history on stress growth and structure changes in the thermotropic liquid crystalline polymer Vectra B950

Rheologica Acta, 36, 82-95, 1997

  1. (38)Transient and steady state rheological behaviour of the thermotropic liquid crystalline polymer Vectra B950

J. Rheology, 40, 947-966, 1996

  1. (39)The relaxation of shear and normal stresses of nematic liquid crystalline polymers in squeezing and shear flow

J. Rheology, 40, 107-129, 1996

  1. (40)The influence of crystallisation on the rheological behaviour of HBA/HNA copolymers

Proceedings of the 12th. PPS meeting, p. 8.13, 1996

  1. (41)Rheology of thermotropic liquid crystalline polymers: slit rheometer measurements

Progress and Trends in Rheology, IV, 494, 1994

  1. (42)Origins of non-linear pressure profiles in the flow of nematic melts in capillaries and slits

Journal of Rheology, 38, 1369-1383, 1994

  1. (43)Non-linear pressure profiles of thermotropic liquid crystalline polymers

Journal of Rheology, 38(5), 1369-1383, 1994

  1. (44)Numerical study of slip at the walls in the extruder

Int. Polymer Processing, 7, 132-139, 1992

  1. (45)Single screw extrusion processing of highly filled suspensions

SPE ANTEC Tech. Papers, 36, 160-165 (1996)

  1. (46)3-D Analysis of the Flow in Co-rotating Twin Screw Extruders

SPE ANTEC Tech. Papers, 36, 139-142 (1990)

  1. (47)Comparison of Experimental Data with the Numerical Simulation of Planar Entry Flow: Role of the Constitutive Equation

J.Num.Meth.Fl. 10, 373-400 (1990)

  1. (48)Simulation of mixing in a Co-rotating Twin Screw Extruder

SPE antec tech. papers, 35, 44-49, 1989

  1. (49)Development of experimental techniques and simulation methods to analyze mixing in Co-rotating Twin Screw Extruder

Adv.Polym.Tech 8, 327-335 (1988)

  1. (50)Towards a better understanding of Mixing in a Co-rotating Twin Screw Extruder

SPE ANTEC tech. papers 34, 64-67, 1988

  1. (51)Review of the entry flow problem: experimental and numerical

J.Non-Newt.Fl.Mech. 24, 121-160, 1987

  1. (52)Primary normal stress difference of two liquid crystalline copolyesters

Rheologica Acta 25, 575-286, 1986

  1. (53)Rheological properties of liquid crystalline copolyester melts: Comparison of capillary and rotary rheometer results

J. Rheol. 29, 539-556, 1985

  1. (54)Transient shear flow behaviour of thermotropic LC copolyesters

Polymeric Liquid Crystals, pp.183-195, Blumstein ed. Plenum Press, 1985

  1. (55)Flow behaviour of thermotropic LC copolyesters

ACS polymer preprints, 24(2) 292-293, 1983

To Chapters in Books...